Go back
HDPE
AdvyForm H0260
Formerly
Hostalen 4731B
Natural
AdvyForm H0260 is a high-density polyethylene (HDPE) with high melt viscosity, for extrusion. It combines stress-cracking resistance with long-term hydrostatic strength, heat stability and extraction stability.
Description
AdvyForm H0260 is a high-density polyethylene (HDPE) with high melt viscosity, for extrusion. It combines stress-cracking resistance with long-term hydrostatic strength, heat stability and extraction stability. The TDS reports conformance with DIN 16833 and ISO 24033 for PE-RT Type II; it does not establish approval of a finished pipe system. Typical customer applications named in the TDS are underfloor heating and multilayer pipes for heating and plumbing.
Processing Techniques
Supplier-listed processing methods: pipe; sheet. Determine processing conditions for the intended application and required properties.
Sheet extrusion/thermoforming
Extrusion
Industry and applications
Drinking water pipe; plumbing, heating and cooling
Compliance and Documentation Notes
Consult the Product Regulatory Summary and Safety Data Sheet (SDS) for regulatory status, including supported, restricted or prohibited applications. Contact Genesis Polymers to request application-specific documentation for AdvyForm H0260.
Technical Properties
Melt Flow Rate
190 °C/5.0 kg
ISO 1133-1
Melt Flow Rate
190 °C/21.6 kg
ISO 1133-1
Density
ISO 1183-1
Flexural Creep Modulus
4-point loading / 50 years extrapolated
DIN 16841
Tensile Modulus
23 °C
ISO 527-1, -2
Tensile Stress at Yield
23 °C, 50 mm/min
ISO 527-1, -2
Tensile Strain at Break
23 °C
ISO 527-1, -2
Tensile Strain at Yield
23 °C, 50 mm/min
ISO 527-1, -2
MRS Classification
ISO 9080
FNCT
4.0 MPa, 2% Arkopal N100, 80 °C
ISO 16770
Charpy Impact Strength - Notched
23 °C
ISO 179-1/1eA
Charpy Impact Strength - Notched
-30 °C
ISO 179-1/1eA
Shore Hardness
Shore D, 3 sec
ISO 868
Vicat Softening Temperature
A50
ISO 306
Vicat Softening Temperature
B50
ISO 306
Oxidation Induction Time
210 °C
ISO 11357-6
Thermal Conductivity
23 °C
EN ISO 22007-2
Coefficient of Linear Thermal Expansion (CLTE)
ISO 11359-1, -2
Surface Resistivity
IEC 60093
Typical values taken from the producer’s (Velogy) technical data sheet, available under Documents. They are not specification limits. Genesis Polymers relies on the producer’s data and cannot accept liability for errors in it. Always check the current data sheet and confirm suitability for your application.
Brand
Feature
Chemical Resistance
Creep Resistance
Heat Aging Resistance
High ESCR
Food Contact
Supplier documents
Version 2, 3 September 2026
