Go back
PP homopolymer
AdvyForm P0409
Formerly
Moplen HF400G
Natural
AdvyForm P0409 is a non-stabilised polypropylene homopolymer powder for compounding. Its main applications are mineral-filled compounds and colour and additive masterbatches.
Description
AdvyForm P0409 is a non-pelletised, non-stabilised polypropylene homopolymer powder. Once pelletised and additivated, it is suitable for injection moulding and extrusion applications. Its main applications are mineral-filled compounds and colour and additive masterbatches. The TDS reports typical properties measured on pelletised and additivated resin, including a melt flow rate of 1.2 g/10 min (230 °C/2.16 kg), a tensile modulus of 1450 MPa (23 °C) and a Vicat softening temperature of 153 °C (A50). These values do not describe the powder as supplied.
Processing Techniques
Supplier-listed processing method: compounding. The powder is supplied without stabilisation; the TDS describes injection moulding and extrusion suitability only after pelletising and additivation. Determine processing conditions for the intended application and required properties.
Compounding
Industry and applications
Mineral-filled compounds; colour masterbatches; additive masterbatches
Compliance and Documentation Notes
Consult the Product Regulatory Summary and Safety Data Sheet (SDS) for regulatory status, including supported, restricted or prohibited applications. Contact Genesis Polymers to request application-specific documentation for AdvyForm P0409.
Technical Properties
Melt Flow Rate
230 °C/2.16 kg
ISO 1133-1
Density
ISO 1183-1
Tensile Modulus
23 °C
ISO 527-1, -2
Charpy Impact Strength - Notched
23 °C
ISO 179
Vicat Softening Temperature
A50
ISO 306
Reported properties are measured on the pelletised and additivated resin, not on the powder as supplied.
Typical values taken from the producer’s (Velogy) technical data sheet, available under Documents. They are not specification limits. Genesis Polymers relies on the producer’s data and cannot accept liability for errors in it. Always check the current data sheet and confirm suitability for your application.
Brand
Feature
Food Contact
Supplier documents
Version 1.1, June 2026
Version 2, 10 August 2026
Version 1, 30 July 2026
Version 2, 10 August 2026
Version 1.2, revision date 3 June 2026
