Go back
HDPE
AdvyForm H0402
Formerly
Petrothene LR52800E
Natural
AdvyForm H0402 is a natural, multimodal high-density polyethylene (HDPE) compound for cable jacketing, conduit and wire insulation. It contains a robust additive package for thermal stabilisation.
Description
AdvyForm H0402 is a natural, multimodal, broad molecular weight high-density polyethylene (HDPE) compound designed for jacketing, conduit and wire insulation. It contains a robust additive package for thermal stabilisation. The TDS states that it meets the requirements of ASTM D3350, with cell classification PE-435406A. Listed attributes include good electrical properties, good thermal stability, high elongation and high environmental stress crack resistance (ESCR). Typical values include melt flow rates of 0.3 g/10 min (190 °C/2.16 kg) and 1.1 g/10 min (190 °C/5.0 kg), a density of 0.95 g/cm³ and ESCR above 2000 h (ASTM D1693).
Processing Techniques
The TDS gives recommended melt temperatures of 190 °C to 230 °C. It lists no processing method, so confirm the conversion route with Genesis Polymers. Determine processing conditions for the intended application and required properties.
Industry and applications
Wire and cable jacketing; conduit; wire insulation
Compliance and Documentation Notes
Consult the Product Regulatory Summary and Safety Data Sheet (SDS) for regulatory status, including supported, restricted or prohibited applications. Contact Genesis Polymers to request application-specific documentation for AdvyForm H0402.
Technical Properties
Melt Flow Rate
190 °C/2.16 kg
ISO 1133-1
Melt Flow Rate
190 °C/5.0 kg
ISO 1133-1
Density
ISO 1183-1
Tensile Modulus
ISO 527-1, -2
Tensile Stress at Yield
23 °C, 50 mm/min
ISO 527-1, -2
Tensile Elongation at Break
ASTM D638
Environmental Stress Crack Resistance
ASTM D1693
Shore Hardness (Shore D)
ISO 868
Oxidation Induction Time
210 °C
ISO 11357-6
Peak Melting Point
ISO 11357-3
Volume Resistivity
ASTM D257
Dielectric Strength
IEC 60243-1
Moisture Content
Supplier method
Moisture content is measured by an internal supplier method.
Typical values taken from the producer’s (Velogy) technical data sheet, available under Documents. They are not specification limits. Genesis Polymers relies on the producer’s data and cannot accept liability for errors in it. Always check the current data sheet and confirm suitability for your application.
Brand
Feature
High ESCR
Supplier documents
Version 2, 3 September 2026
Version 2, 10 August 2026
Version 1, 30 July 2026
Version 2, 17 August 2026
Version 1.3, revision date 1 June 2026
