Go back
PP homopolymer
AdvyForm P1900
Formerly
Moplen HP500V
Natural
AdvyForm P1900 is a polypropylene homopolymer for injection moulding and technical compounds. It offers good fluidity and is supplied as pellets for use as a homopolymer component in compounds.
Description
AdvyForm P1900 is a polypropylene homopolymer for injection moulding and technical compounds. It offers good fluidity and is supplied as pellets for use as a homopolymer component in compounds. The TDS gives a typical melt flow rate of 120 g/10 min (230 °C/2.16 kg).
Processing Techniques
Supplier-listed processing method: injection moulding. Determine processing conditions for the intended application and required properties.
Injection molding
Industry and applications
Technical compounding
Compliance and Documentation Notes
Consult the Product Regulatory Summary and Safety Data Sheet (SDS) for regulatory status, including supported, restricted or prohibited applications. Contact Genesis Polymers to request application-specific documentation for AdvyForm P1900.
Technical Properties
Melt Flow Rate
230 °C/2.16 kg
ISO 1133-1
Density
ISO 1183-1
Flexural Modulus
ISO 178
Tensile Modulus
ISO 527-1, -2
Tensile Stress at Yield
23 °C
ISO 527-1, -2
Tensile Strain at Yield
23 °C
ISO 527-1, -2
Charpy Impact Strength - Notched
23 °C, Type 1, Edgewise, Notch A
ISO 179-1/1eA
Vicat Softening Temperature
A50
ISO 306
Heat Deflection Temperature B
0.45 MPa, Unannealed
ISO 75B-1, -2
Typical values taken from the producer’s (Velogy) technical data sheet, available under Documents. They are not specification limits. Genesis Polymers relies on the producer’s data and cannot accept liability for errors in it. Always check the current data sheet and confirm suitability for your application.
Brand
Feature
High Flow
High Impact
High Stiffness
Food Contact
Supplier documents
Version 2, 4 September 2026
