Go back
PP impact copolymer
AdvyForm E1080
Formerly
Hifax EP3080G
Natural
Non-filled polypropylene copolymer for injection moulding, with very high impact strength and good UV resistance for outdoor applications.
Description
AdvyForm E1080 is a non-filled polypropylene copolymer for injection moulding with very high impact strength. It is designed for outdoor applications with good UV resistance and is listed for automotive bumpers and non-painted bumpers. The grade is also listed for compounding. Contact Genesis Polymers to discuss AdvyForm E1080 for your application.
Processing Techniques
Listed processing methods are compounding and injection moulding. Specific recommendations require the end use, required properties and fabrication equipment.
Compounding
Injection molding
Industry and applications
Bumpers; non-painted bumpers; outdoor applications
Compliance and Documentation Notes
Regulatory status is provided in the Product Regulatory Summary and Safety Data Sheet (SDS). Contact Genesis Polymers to request application-specific regulatory documentation for AdvyForm E1080.
Technical Properties
Melt Flow Rate
at 230 °C and 2.16 kg
ISO 1133-1
Density
23 °C, Method A
ISO 1183-1
Flexural Modulus
ISO 178
Tensile Modulus
ISO 527-1, -2
Tensile Stress at Break
ISO 527-1, -2
Tensile Stress at Yield
ISO 527-1, -2
Tensile Strain at Break
ISO 527-1, -2
Tensile Strain at Yield
ISO 527-1, -2
Charpy Impact Strength - Notched
23 °C, Type 1, Edgewise, Notch A
ISO 179
Charpy Impact Strength - Notched
-20 °C, Type 1, Edgewise, Notch A
ISO 179
Charpy Impact Strength - Notched
-30 °C, Type 1, Edgewise, Notch A
ISO 179
Vicat Softening Temperature
A/50
ISO 306
Heat Deflection Temperature B
0.45 MPa, Unannealed
ISO 75-1, -2
DSC Melting Point
ISO 11357-3
Typical values taken from the producer’s (Velogy) technical data sheet, available under Documents. They are not specification limits. Genesis Polymers relies on the producer’s data and cannot accept liability for errors in it. Always check the current data sheet and confirm suitability for your application.
Brand
Feature
High Impact
UV Stabilized
Supplier documents
Version 2, 3 September 2026
Version 2, 10 August 2026
Version 1, 30 July 2026
Version 2, 7 August 2026
Version 1.2, revision date 1 June 2026
