Go back
PP impact copolymer
AdvyForm E0660
Formerly
Moplen EP1006
Natural
AdvyForm E0660 is a nucleated heterophasic copolymer with medium flow, for extrusion and injection moulding. It combines a medium stiffness and impact balance at low temperatures with low stress whitening.
Description
AdvyForm E0660 is a nucleated heterophasic copolymer with medium flow, for extrusion and injection moulding. It combines a medium stiffness and impact balance at low temperatures with low stress whitening. Its additive formulation provides heat-ageing resistance.
Processing Techniques
Supplier-listed processing method: injection moulding. The TDS product description also refers to extrusion. Determine processing conditions for the intended application and required properties.
Injection molding
Industry and applications
Battery cases
Compliance and Documentation Notes
Consult the Product Regulatory Summary and Safety Data Sheet (SDS) for regulatory status, including supported, restricted or prohibited applications. Contact Genesis Polymers to request application-specific documentation for AdvyForm E0660.
Technical Properties
Melt Flow Rate
230 °C/2.16 kg
ISO 1133-1
Density
ISO 1183-1
Flexural Modulus
ISO 178
Tensile Modulus
ISO 527-1, -2
Tensile Stress at Break
ISO 527-1, -2
Tensile Stress at Yield
ISO 527-1, -2
Tensile Strain at Break
ISO 527-1, -2
Tensile Strain at Yield
ISO 527-1, -2
Charpy Impact Strength – Notched
23 °C, Type 1, Edgewise, Notch A
ISO 179
Charpy Impact Strength – Notched
-20 °C, Type 1, Edgewise, Notch A
ISO 179
Vicat Softening Temperature
A50
ISO 306
Deflection Temperature Under Load
0.45 MPa, Unannealed
ISO 75B-1, -2
Typical values taken from the producer’s (Velogy) technical data sheet, available under Documents. They are not specification limits. Genesis Polymers relies on the producer’s data and cannot accept liability for errors in it. Always check the current data sheet and confirm suitability for your application.
Brand
Feature
Heat Aging Resistance
High Impact
High Stiffness
Low Stress Whitening
Low Warpage
Nucleated
Supplier documents
Version 2, 3 September 2026
