Go back
PP homopolymer
AdvyForm P0602
Formerly
Moplen HP501H
Natural
AdvyForm P0602 is a polypropylene homopolymer for injection and compression moulding. It has a good stiffness and impact balance at ambient temperature.
Description
AdvyForm P0602 is a polypropylene homopolymer for injection and compression moulding. It has a good stiffness and impact balance at ambient temperature. The supplier also describes good hinge performance in caps and good environmental stress-cracking resistance. The TDS gives a typical melt flow rate of 2.1 g/10 min (230 °C/2.16 kg).
Processing Techniques
The TDS describes injection and compression moulding; its processing-method field lists extrusion blow moulding, injection moulding and thermoforming. Determine processing conditions for the intended application and required properties.
Blow molding
Sheet extrusion/thermoforming
Injection molding
Extrusion blow molding
Industry and applications
Caps and closures; housewares
Compliance and Documentation Notes
Consult the Product Regulatory Summary and Safety Data Sheet (SDS) for regulatory status, including supported, restricted or prohibited applications. Contact Genesis Polymers to request application-specific documentation for AdvyForm P0602.
Technical Properties
Melt Flow Rate
230 °C/2.16 kg
ISO 1133-1
Density
23 °C
ISO 1183-1
Tensile Modulus
ISO 527-1, -2
Tensile Stress at Yield
ISO 527-1, -2
Tensile Strain at Break
ISO 527-1, -2
Tensile Strain at Yield
ISO 527-1, -2
Charpy Impact Strength - Notched
23 °C, Type 1, Edgewise, Notch A
ISO 179
Vicat Softening Temperature
A50
ISO 306
Heat Deflection Temperature B
0.45 MPa, Unannealed
ISO 75B-1, -2
Typical values taken from the producer’s (Velogy) technical data sheet, available under Documents. They are not specification limits. Genesis Polymers relies on the producer’s data and cannot accept liability for errors in it. Always check the current data sheet and confirm suitability for your application.
Brand
Feature
High ESCR
UL Listed
Food Contact
Supplier documents
Version 2, 3 September 2026
