PP homopolymer

AdvyForm P0670

""

Natural

PP homopolymer

AdvyForm P0670

Products

/

AdvyForm

/

AdvyForm P0670

— PP homopolymer

AdvyForm P0670

Produced by

→

AdvyForm P0670 is a low-flow, nucleated polypropylene homopolymer for compression moulding. It is formulated for caps and closures.

APPLICATIONS

— AT A GLANCE

AdvyForm P0670 at a glance

Polymer family

PP homopolymer

Producer

Features

Nucleated

Antiblock/Slip

Food Contact

— ABOUT THIS GRADE

AdvyForm P0670 is a low-flow polypropylene homopolymer used in compression moulding. It is formulated to optimise its performance in caps and closures. The TDS lists nucleation and high slip among its attributes. Typical values include a melt flow rate of 2.2 g/10 min (230 °C/2.16 kg), a tensile modulus of 1700 MPa and a heat deflection temperature of 105 °C (0.45 MPa, unannealed, ISO 75B-1, -2).

— TECHNICAL PROPERTIES

Technical properties

Melt Flow Rate

2.2 g/10 min

230 °C/2.16 kg

·

ISO 1133-1

Density

0.9 g/cm³

23 °C

·

ISO 1183-1

Tensile Modulus

1700 MPa

ISO 527-1, -2

Tensile Stress at Yield

35 MPa

ISO 527-1, -2

Tensile Strain at Break

> 50 %

ISO 527-1, -2

Tensile Strain at Yield

8 %

ISO 527-1, -2

Charpy Impact Strength - Notched

10 kJ/m²

23 °C, Type 1, Edgewise, Notch A

·

ISO 179

Vicat Softening Temperature

154 °C

A50

·

ISO 306

Heat Deflection Temperature B

105 °C

0.45 MPa, unannealed

·

ISO 75B-1, -2

Typical values taken from the producer’s (Velogy) technical data sheet, available under Supplier documents. They are not specification limits. Genesis Polymers relies on the producer’s data and cannot accept liability for errors in it. Always check the current data sheet and confirm suitability for your application.

Processing

Supplier-listed processing method: compression moulding. Determine processing conditions for the intended application and required properties.

Typical applications

Caps and closures

Compliance and documentation notes

Consult the Product Regulatory Summary and Safety Data Sheet (SDS) for regulatory status, including supported, restricted or prohibited applications. Contact Genesis Polymers to request application-specific documentation for AdvyForm P0670.

— TECHNICAL PROPERTIES

Technical properties

PROPERTY

VALUE

CONDITIONS

METHOD

Melt Flow Rate

2.2 g/10 min

230 °C/2.16 kg

ISO 1133-1

Density

0.9 g/cm³

23 °C

ISO 1183-1

Tensile Modulus

1700 MPa

ISO 527-1, -2

Tensile Stress at Yield

35 MPa

ISO 527-1, -2

Tensile Strain at Break

> 50 %

ISO 527-1, -2

Tensile Strain at Yield

8 %

ISO 527-1, -2

Charpy Impact Strength - Notched

10 kJ/m²

23 °C, Type 1, Edgewise, Notch A

ISO 179

Vicat Softening Temperature

154 °C

A50

ISO 306

Heat Deflection Temperature B

105 °C

0.45 MPa, unannealed

ISO 75B-1, -2

Typical values taken from the producer’s (Velogy) technical data sheet, available under Supplier documents. They are not specification limits. Genesis Polymers relies on the producer’s data and cannot accept liability for errors in it. Always check the current data sheet and confirm suitability for your application.

— APPLICATIONS

Applications for this grade

— BRAND AND PRODUCER

Brand and producer

Brand

Advy

Form®

For demanding applications where material performance makes the difference: PP, HDPE and LDPE for packaging, automotive, compounding, pipe and film.

PP

LDPE

HDPE

Advy

Form®

For demanding applications where material performance makes the difference: PP, HDPE and LDPE for packaging, automotive, compounding, pipe and film.

PP

LDPE

HDPE

— NEED HELP CHOOSING?

Not sure which grade fits?

Tell us your part, process and the grade you use today, and we’ll help you confirm the right grade.