Go back
PP homopolymer
AdvyForm P1140
Formerly
Moplen HP548N
Natural
AdvyForm P1140 is a nucleated polypropylene homopolymer with medium melt-flow rate for injection moulding. It has good stiffness and flowability.
Description
AdvyForm P1140 is a nucleated polypropylene homopolymer with medium melt-flow rate for injection moulding. It has good stiffness and flowability. The TDS associates its nucleation with improved productivity and lower cycle times; processing results depend on the application and conditions.
Processing Techniques
Supplier-listed processing method: injection moulding. Determine processing conditions for the intended application and required properties.
Injection molding
Industry and applications
Caps and closures; housewares
Compliance and Documentation Notes
Consult the Product Regulatory Summary and Safety Data Sheet (SDS) for regulatory status, including supported, restricted or prohibited applications. Contact Genesis Polymers to request application-specific documentation for AdvyForm P1140.
Technical Properties
Melt Flow Rate
230 °C/2.16 kg
ISO 1133-1
Density
23 °C
ISO 1183-1
Tensile Modulus
ISO 527-1, -2
Tensile Stress at Yield
ISO 527-1, -2
Tensile Strain at Break
ISO 527-1, -2
Tensile Strain at Yield
ISO 527-1, -2
Charpy Impact Strength
23 °C, Type 1, Edgewise, Notch A
ISO 179
Ball Indentation Hardness
H 358/30
ISO 2039-1
Vicat Softening Temperature
A50
ISO 306
Heat Deflection Temperature B
0.45 MPa, Unannealed
ISO 75B-1, -2
Typical values taken from the producer’s (Velogy) technical data sheet, available under Documents. They are not specification limits. Genesis Polymers relies on the producer’s data and cannot accept liability for errors in it. Always check the current data sheet and confirm suitability for your application.
Brand
Feature
Antistatic
Nucleated
Food Contact
Supplier documents
Version 2, 4 September 2026
