Go back
PP impact copolymer
KeyForm E1700
Formerly
Moplen EP300U
Natural
KeyForm E1700 is a very high-flow heterophasic polypropylene copolymer for injection moulding. It combines easy processing with good impact strength.
Description
KeyForm E1700 is a very high-flow heterophasic polypropylene copolymer for injection moulding. It combines easy processing with good impact strength, and the TDS also lists low-temperature impact resistance among its attributes. Its main applications are thin-wall injection-moulded food and non-food containers and technical compounds. Any food-contact use requires the applicable regulatory documentation and end-use review.
Processing Techniques
Supplier-listed processing methods: compounding; injection moulding. Determine processing conditions for the intended application and required properties.
Compounding
Injection molding
Industry and applications
Thin-wall injection-moulded food containers; thin-wall injection-moulded non-food containers; technical compounds
Compliance and Documentation Notes
Consult the Product Regulatory Summary and Safety Data Sheet (SDS) for regulatory status, including supported, restricted or prohibited applications. Contact Genesis Polymers to request application-specific documentation for KeyForm E1700.
Technical Properties
Melt Flow Rate
230 °C/2.16 kg
ISO 1133-1
Density
ISO 1183-1
Flexural Modulus
ISO 178
Tensile Modulus
ISO 527-1, -2
Tensile Stress at Break
ISO 527-1, -2
Tensile Stress at Yield
ISO 527-1, -2
Tensile Strain at Break
ISO 527-1, -2
Tensile Strain at Yield
ISO 527-1, -2
Charpy Impact Strength - Notched
23 °C, Type 1, Edgewise, Notch A
ISO 179
Charpy Impact Strength - Notched
0 °C
ISO 179
Charpy Impact Strength - Notched
-20 °C, Type 1, Edgewise, Notch A
ISO 179
Vicat Softening Temperature
A50
ISO 306
Deflection Temperature Under Load
0.45 MPa, Unannealed
ISO 75B-1, -2
DSC Melting Point
DSC
Typical values taken from the producer’s (Velogy) technical data sheet, available under Documents. They are not specification limits. Genesis Polymers relies on the producer’s data and cannot accept liability for errors in it. Always check the current data sheet and confirm suitability for your application.
Brand
Feature
High Flow
High Impact
Supplier documents
Version 1.1, June 2026
Version 2, 10 August 2026
Version 1, 30 July 2026
Version 2, 1 June 2026
Version 1.2, revision date 1 June 2026
