KeyForm

High-density polyethylene resin for general injection moulding, with good flowability, good processability and high rigidity.

Non-additivated low-density polyethylene with high melt strength for blown-film extrusion and good bubble stability.

KeyForm L0401 is a non-additivated low-density polyethylene, for blown-film extrusion. Its high melt strength supports bubble stability.

KeyForm E1030 is a nucleated heterophasic copolymer for injection moulding. It combines high impact performance with good stiffness.

KeyForm E1340 is a nucleated heterophasic copolymer with an antistatic agent, for injection moulding. It combines a good stiffness and impact balance with medium fluidity.

KeyForm E0530 is a heterophasic copolymer developed for extrusion. It combines high stiffness with very high impact performance at room and sub-zero temperatures, dimensional stability, and creep and deformation resistance.

KeyForm E0800 is a low-fluidity impact copolymer for injection moulding. It combines very high impact strength, including at low temperatures, with good stiffness.

KeyForm P1340 is a nucleated homopolymer with an antistatic additive, for injection moulding. It combines good stiffness with good flowability.

KeyForm P1640 is a nucleated homopolymer with an antistatic additive, for injection moulding. It combines high flow with medium stiffness.

KeyForm H0401 is a high-density polyethylene for small blow-moulded items, including thin-wall packaging, consumer goods and toys. It combines high stiffness with high stress-cracking resistance and has a broad molecular-weight distribution.

KeyForm E1230 is a nucleated heterophasic copolymer for injection moulding. It combines high stiffness with a good impact balance.

KeyForm L0600 is a non-additivated low-density polyethylene, supplied as pellets. Its good melt strength supports bubble stability during blown-film extrusion.

KeyForm L0850 is a low-density polyethylene containing slip and antiblocking additives. It offers a balance of processability and mechanical properties.

KeyForm H0100 is a high-density polyethylene combining stiffness and environmental stress-cracking resistance with high impact resistance. It contains antioxidants and is supplied as pellets.

KeyForm H0400 is a high-density polyethylene for small blow-moulded items, including thin-wall packaging and consumer goods. It has very high stiffness and a broad molecular-weight distribution.

KeyForm H0520 is a high-density polyethylene with medium molar mass and a narrow molar-mass distribution, for tapes. It contains a lubricant.

KeyForm H0500 is a high-density polyethylene with medium molar mass and a narrow molar-mass distribution, for tapes.

KeyForm H0501 is a high-density polyethylene with medium molar mass and a narrow molar-mass distribution, for tapes. It offers very good bubble stability and processability.

KeyForm H0620 is a high-density polyethylene with medium molar mass and a narrow molar-mass distribution, for monofilaments. It contains a lubricant and is described as easy-flowing, with good processing performance on monofilament lines.

KeyForm H0521 is a high-density polyethylene with medium molar mass and a narrow molar-mass distribution, for monofilament production. It contains a lubricant and is described as easy-flowing, with good processing performance on monofilament lines.

KeyForm L0800 is a non-additivated low-density polyethylene.

KeyForm L0650 is a low-density polyethylene containing slip and antiblocking additives. It has good melt strength, which supports bubble stability during blown-film extrusion.

KeyForm L0601 is a non-additivated low-density polyethylene, for blown-film extrusion. It has good melt strength and bubble stability.

KeyForm L0651 is a low-density polyethylene containing a slip agent. It has good melt strength, which supports bubble stability during blown-film extrusion.

KeyForm E1200 is a heterophasic copolymer for injection moulding. It offers a balance of stiffness, impact strength and processability.

KeyForm E0600 is a heterophasic copolymer developed for extrusion. It combines high stiffness with very high impact performance at room and sub-zero temperatures, dimensional stability, and creep and deformation resistance.

KeyForm E1541 is a nucleated heterophasic copolymer with an antistatic agent, for injection moulding. It combines a good impact and stiffness balance with medium fluidity and good organoleptic performance.

KeyForm E1240 is a nucleated heterophasic copolymer containing an antistatic agent, for injection moulding. It combines high stiffness with medium fluidity.

KeyForm E1540 is a nucleated heterophasic copolymer containing an antistatic agent, for injection moulding. It combines high fluidity with a good impact and stiffness balance.

KeyForm E1640 is a heterophasic copolymer for injection moulding, with high flow and medium stiffness. It is nucleated and contains an antistatic additive.

KeyForm E1741 is a nucleated heterophasic copolymer with an antistatic additive, for injection moulding. It combines high fluidity with a good impact and stiffness balance.

KeyForm E1840 is a nucleated heterophasic copolymer with an antistatic additive for injection moulding. It combines high fluidity with balanced mechanical properties.

KeyForm E1242 is a fast-crystallising heterophasic copolymer containing an antistatic agent, for injection moulding. It combines high stiffness with medium fluidity.

KeyForm E1742 is a nucleated heterophasic copolymer containing an antistatic agent, for injection moulding. The TDS lists high flow, with a typical melt flow rate of 70 g/10 min (230 °C/2.16 kg).

KeyForm E1841 is a nucleated, high-fluidity heterophasic copolymer with an antistatic agent, for thin-wall injection moulding. It has high stiffness, good dimensional stability and antistatic properties.

KeyForm P0600 is a homopolymer for extrusion and compounding. It offers easy processing and a good stiffness and impact balance at ambient temperature.

KeyForm P1300 is a polypropylene homopolymer for injection moulding, combining high fluidity with good stiffness.

KeyForm P1003 is a high-flow polypropylene homopolymer for biaxially oriented polypropylene (BOPP) film on tubular double-bubble lines and for cast film.

KeyForm P0711 is a polypropylene homopolymer for extrusion of high-tenacity staple fibres. It contains an anti-gas-fading stabilisation package.

KeyForm P0510 is a polypropylene homopolymer for extrusion and thermoforming. Its additive package is designed for low water carry-over.

KeyForm P0710 is a polypropylene homopolymer for extrusion and thermoforming. Its additive package is designed for low water carry-over.

KeyForm P1100 is a polypropylene homopolymer for general-purpose injection moulding. It has good flow and stiffness.

KeyForm P1400 is a polypropylene homopolymer for injection moulding and technical compounds. It offers good fluidity and is supplied as pellets for use as a homopolymer component in compounds.

KeyForm P1004 is a polypropylene homopolymer used in technical compounds.

KeyForm P1005 is a polypropylene homopolymer used in technical compounds.

KeyForm P1002 is a polypropylene homopolymer without slip or antiblocking additives, for cast film. Typical uses include packaging and lamination films for food, flowers, books, stationery and textiles.

KeyForm P1050 is a polypropylene homopolymer containing slip and antiblocking additives, for cast film. Typical applications include packaging and lamination films for food, flowers, books and stationery.

KeyForm P0601 is a polypropylene homopolymer for biaxially oriented polypropylene (BOPP) film. It is intended for plain and coextruded structures suitable for metallisation.

KeyForm P0700 is a polypropylene homopolymer for biaxially oriented polypropylene (BOPP) film. It is suitable for metallisable film in monolayer and coextruded structures.

KeyForm P0810 is a polypropylene homopolymer for extrusion of high-tenacity staple fibres. It contains an anti-gas-fading stabilisation package.

KeyForm P0910 is a polypropylene homopolymer for extrusion of staple fibres. It contains an anti-gas-fading stabilisation package.

KeyForm P1110 is a polypropylene homopolymer for extrusion of continuous filaments and fine-denier staple fibres. It contains an anti-gas-fading stabilisation package.

KeyForm P1310 is a polypropylene homopolymer for extrusion of bulk continuous filaments and fine-denier staple fibres. It contains an anti-gas-fading stabilisation package.

KeyForm P1111 is a polypropylene homopolymer with a very narrow molecular-weight distribution and an anti-gas-fading stabilisation package. It is used for extrusion of high-tenacity filaments and spunbond nonwovens.

KeyForm P1311 is a polypropylene homopolymer for continuous-filament extrusion. It has a very narrow molecular-weight distribution and an anti-gas-fading stabilisation package.

KeyForm P1410 is a polypropylene homopolymer for continuous-filament extrusion. It has a very narrow molecular-weight distribution and an anti-gas-fading stabilisation package.

KeyForm P1411 is a polypropylene homopolymer for continuous-filament extrusion. It has a very narrow molecular-weight distribution and an anti-gas-fading stabilisation package.

KeyForm P0740 is a nucleated homopolymer for extrusion and thermoforming, with good stiffness and transparency. Typical uses include fruit baskets, trays, transparent drinking cups and containers.

KeyForm P1210 is a polypropylene homopolymer for continuous-filament extrusion. It has a very narrow molecular-weight distribution and an anti-gas-fading stabilisation package.

KeyForm E1700 is a very high-flow heterophasic polypropylene copolymer for injection moulding. It combines easy processing with good impact strength.

KeyForm L0851 is a low-density polyethylene containing a slip agent, for blown film. It offers a balance of processability and mechanical properties.

KeyForm H0600 is a high-density polyethylene for corrugated pipe extrusion. It combines stiffness with high stress-cracking resistance.

KeyForm H1100 is a high-density polyethylene for general injection moulding. It offers high environmental stress-cracking resistance (ESCR), good impact resistance, good flow and low warpage.

KeyForm H1180 is a UV-stabilised high-density polyethylene for general injection moulding. It offers high environmental stress-cracking resistance (ESCR), good impact resistance, good flow and low warpage.

KeyForm H1280 is a UV-stabilised high-density polyethylene for injection moulding. It has good flow and high rigidity.

KeyForm L0801 is a non-additivated low-density polyethylene for blown film. It offers a balance of processability and mechanical properties.

KeyForm L1101 is a non-additivated low-density polyethylene for blown film. It is characterised by good processability.

KeyForm P0500 is a polypropylene homopolymer for extrusion. It is formulated with a low water-carry-over additive package.

KeyForm P0940 is a nucleated polypropylene homopolymer with antistatic additivation. It combines medium flow with good stiffness.

KeyForm R1440 is a nucleated polypropylene random copolymer with antistatic additivation, for injection moulding. It combines high flow and transparency with good organoleptic performance.

KeyForm H0301 is a high-density polyethylene for blown film. It combines stiffness with impact performance, and the supplier reports very low gel levels.

KeyForm L1100 is a non-additivated low-density polyethylene with good processability. Films made from it have good optical properties.

KeyForm P0702 is a polypropylene homopolymer for biaxially oriented polypropylene (BOPP) film. It is suitable for metallisable film, in monolayer and coextruded structures.

KeyForm R1840 is a polypropylene random copolymer for injection moulding, with clarifier and antistatic additivation. It combines very high flow with high transparency.