Go back
PP homopolymer
AdvyForm P1000
Formerly
Moplen HP501M
Natural
AdvyForm P1000 is a polypropylene homopolymer for injection moulding with medium flow and a medium stiffness-impact balance. Typical uses are furniture and housewares.
Description
AdvyForm P1000 is a polypropylene homopolymer for injection moulding. It combines medium flow with a medium stiffness-impact balance and is typically used in furniture and housewares. The TDS states that the grade is UL listed under file E556200; confirm the scope of that listing for the intended part. Typical values include a melt flow rate of 7.5 g/10 min (230 °C/2.16 kg), a tensile modulus of 1350 MPa and a heat deflection temperature of 85 °C (0.45 MPa, unannealed, ISO 75B-1, -2).
Processing Techniques
Supplier-listed processing method: injection moulding. Determine processing conditions for the intended application and required properties.
Injection molding
Industry and applications
Furniture; housewares
Compliance and Documentation Notes
Consult the Product Regulatory Summary and Safety Data Sheet (SDS) for regulatory status, including supported, restricted or prohibited applications. Contact Genesis Polymers to request application-specific documentation for AdvyForm P1000.
Technical Properties
Melt Flow Rate
230 °C/2.16 kg
ISO 1133-1
Density
23 °C
ISO 1183-1
Tensile Modulus
ISO 527-1, -2
Tensile Stress at Yield
ISO 527-1, -2
Tensile Strain at Break
ISO 527-1, -2
Tensile Strain at Yield
ISO 527-1, -2
Charpy Impact Strength
23 °C, Type 1, Edgewise, Notch A
ISO 179
Vicat Softening Temperature
A50
ISO 306
Heat Deflection Temperature B
0.45 MPa, unannealed
ISO 75B-1, -2
Typical values taken from the producer’s (Velogy) technical data sheet, available under Documents. They are not specification limits. Genesis Polymers relies on the producer’s data and cannot accept liability for errors in it. Always check the current data sheet and confirm suitability for your application.
Brand
Feature
UL Listed
High Stiffness
High Impact
Food Contact
Supplier documents
Version 2, 3 September 2026
Version 2, 10 August 2026
Version 1, 30 July 2026
Version 2, 19 August 2026
Version 1.2, revision date 3 June 2026
