PP homopolymer

AdvyForm P2010

""

Natural

PP homopolymer

AdvyForm P2010

Products

/

AdvyForm

/

AdvyForm P2010

— PP homopolymer

AdvyForm P2010

Produced by

→

AdvyForm P2010 is a very high-flow polypropylene homopolymer with a very narrow molecular weight distribution for meltblown nonwovens and compounding. It is supplied in pelletised form.

APPLICATIONS

— AT A GLANCE

AdvyForm P2010 at a glance

Polymer family

PP homopolymer

Producer

Features

High Flow

Narrow Molecular Weight Distribution

Processing

Compounding

Fibre and nonwoven

— ABOUT THIS GRADE

AdvyForm P2010 is a polypropylene homopolymer for extrusion applications, with a very high melt flow rate and a very narrow molecular weight distribution. It is supplied in pelletised form. It is used to produce meltblown nonwovens for barrier and filtration applications and in compounding. The TDS lists controlled rheology among its attributes. Its typical melt flow rate is 450 g/10 min (230 °C/2.16 kg, ISO 1133-1).

— TECHNICAL PROPERTIES

Technical properties

Melt Flow Rate

450 g/10 min

230 °C/2.16 kg

·

ISO 1133-1

Typical values taken from the producer’s (Velogy) technical data sheet, available under Supplier documents. They are not specification limits. Genesis Polymers relies on the producer’s data and cannot accept liability for errors in it. Always check the current data sheet and confirm suitability for your application.

Processing

Supplier-listed processing methods: compounding; continuous filament spinning; fibres; meltblown. Determine processing conditions for the intended application and required properties.

Compounding

Fibre and nonwoven

Typical applications

Absorption and filtration; colour concentrates; hygiene nonwovens; nonwovens; wipes and tissues

Compliance and documentation notes

Consult the Product Regulatory Summary and Safety Data Sheet (SDS) for regulatory status, including supported, restricted or prohibited applications. Contact Genesis Polymers to request application-specific documentation for AdvyForm P2010.

— TECHNICAL PROPERTIES

Technical properties

PROPERTY

VALUE

CONDITIONS

METHOD

Melt Flow Rate

450 g/10 min

230 °C/2.16 kg

ISO 1133-1

Typical values taken from the producer’s (Velogy) technical data sheet, available under Supplier documents. They are not specification limits. Genesis Polymers relies on the producer’s data and cannot accept liability for errors in it. Always check the current data sheet and confirm suitability for your application.

— APPLICATIONS

Applications for this grade

— BRAND AND PRODUCER

Brand and producer

Brand

Advy

Form®

For demanding applications where material performance makes the difference: PP, HDPE and LDPE for packaging, automotive, compounding, pipe and film.

PP

LDPE

HDPE

Advy

Form®

For demanding applications where material performance makes the difference: PP, HDPE and LDPE for packaging, automotive, compounding, pipe and film.

PP

LDPE

HDPE

— NEED HELP CHOOSING?

Not sure which grade fits?

Tell us your part, process and the grade you use today, and we’ll help you confirm the right grade.