PP homopolymer

AdvyForm P2310

""

Natural

PP homopolymer

AdvyForm P2310

Products

/

AdvyForm

/

AdvyForm P2310

— PP homopolymer

AdvyForm P2310

Produced by

→

AdvyForm P2310 is a polypropylene homopolymer with very high melt-flow rate and a very narrow molecular-weight distribution, supplied as pellets. It is used for meltblown nonwovens and compounding.

APPLICATIONS

— AT A GLANCE

AdvyForm P2310 at a glance

Polymer family

PP homopolymer

Producer

Features

High Flow

Narrow Molecular Weight Distribution

Processing

Fibre and nonwoven

Compounding

— ABOUT THIS GRADE

AdvyForm P2310 is a polypropylene homopolymer with very high melt-flow rate and a very narrow molecular-weight distribution, supplied as pellets. It is used for meltblown nonwovens and compounding. The supplier describes high barrier and filtration properties in the nonwoven applications. The TDS gives a typical melt flow rate of 1500 g/10 min (230 °C/2.16 kg).

— TECHNICAL PROPERTIES

Technical properties

Melt Flow Rate

1500 g/10 min

230 °C/2.16 kg

·

ISO 1133-1

Typical values taken from the producer’s (Velogy) technical data sheet, available under Supplier documents. They are not specification limits. Genesis Polymers relies on the producer’s data and cannot accept liability for errors in it. Always check the current data sheet and confirm suitability for your application.

Processing

Supplier-listed processing methods: compounding; continuous filament spinning; fibres; meltblown. Determine processing conditions for the intended application and required properties.

Fibre and nonwoven

Compounding

Typical applications

Absorption and filtration; colour concentrates; hygiene nonwoven; nonwovens; wipes and tissues

Compliance and documentation notes

Consult the Product Regulatory Summary and Safety Data Sheet (SDS) for regulatory status, including supported, restricted or prohibited applications. Contact Genesis Polymers to request application-specific documentation for AdvyForm P2310.

— TECHNICAL PROPERTIES

Technical properties

PROPERTY

VALUE

CONDITIONS

METHOD

Melt Flow Rate

1500 g/10 min

230 °C/2.16 kg

ISO 1133-1

Typical values taken from the producer’s (Velogy) technical data sheet, available under Supplier documents. They are not specification limits. Genesis Polymers relies on the producer’s data and cannot accept liability for errors in it. Always check the current data sheet and confirm suitability for your application.

— APPLICATIONS

Applications for this grade

— BRAND AND PRODUCER

Brand and producer

Brand

Advy

Form®

For demanding applications where material performance makes the difference: PP, HDPE and LDPE for packaging, automotive, compounding, pipe and film.

PP

LDPE

HDPE

Advy

Form®

For demanding applications where material performance makes the difference: PP, HDPE and LDPE for packaging, automotive, compounding, pipe and film.

PP

LDPE

HDPE

— NEED HELP CHOOSING?

Not sure which grade fits?

Tell us your part, process and the grade you use today, and we’ll help you confirm the right grade.