Go back
PP random copolymer
AdvyForm R1541
Formerly
Moplen RP348T HP
Natural
AdvyForm R1541 is a random copolymer with a clarifier and antistatic additives, for injection moulding. It has very good flowability and transparency and is typically used for thin-wall packaging.
Description
AdvyForm R1541 is a random copolymer with a clarifier and antistatic additives, for injection moulding. It has very good flowability and transparency and is typically used for thin-wall packaging. The TDS describes lower-temperature processing and potential energy and cycle-time benefits; these depend on the application and processing conditions.
Processing Techniques
Supplier-listed processing method: injection moulding. Determine processing conditions for the intended application and required properties.
Injection molding
Industry and applications
Caps and closures; clear containers; housewares; sports, leisure and toys
Compliance and Documentation Notes
Consult the Product Regulatory Summary and Safety Data Sheet (SDS) for regulatory status, including supported, restricted or prohibited applications. Contact Genesis Polymers to request application-specific documentation for AdvyForm R1541.
Technical Properties
Melt Flow Rate
230 °C/2.16 kg
ISO 1133-1
Density
23 °C
ISO 1183-1
Tensile Modulus
ISO 527-1, -2
Tensile Stress at Yield
ISO 527-1, -2
Tensile Strain at Break
ISO 527-1, -2
Tensile Strain at Yield
ISO 527-1, -2
Charpy Impact Strength - Notched
23 °C, Type 1, Edgewise, Notch A
ISO 179
Charpy Impact Strength - Notched
0 °C, Type 1, Edgewise, Notch A
ISO 179
Vicat Softening Temperature
A50
ISO 306
Heat Deflection Temperature B
0.45 MPa, Unannealed
ISO 75B-1, -2
Haze
1 mm - injection molded disc
ASTM D1003
Typical values taken from the producer’s (Velogy) technical data sheet, available under Documents. They are not specification limits. Genesis Polymers relies on the producer’s data and cannot accept liability for errors in it. Always check the current data sheet and confirm suitability for your application.
Brand
Feature
Antistatic
Clarified
High Flow
Nucleated
Food Contact
Supplier documents
Version 2, 4 September 2026
