Go back
HDPE
CertyForm H1201
Formerly
Purell GC 7260
Natural
CertyForm H1201 is a high-density polyethylene for injection moulding. It has good flow and high rigidity.
Description
CertyForm H1201 is a high-density polyethylene for injection moulding. It has good flow and high rigidity. The supplier highlights its organoleptic properties and a balance of stiffness, toughness and processability for caps and closures, including closures for still mineral water, and tube shoulders. Listed applications include healthcare caps and closures, collapsible tubes and medical devices; medical, pharmaceutical and food-contact uses require end-use review.
Processing Techniques
Supplier-listed processing method: injection moulding. Determine processing conditions for the intended application and required properties.
Injection molding
Industry and applications
Caps and closures; caps and closures (healthcare); collapsible tubes; collapsible tubes (healthcare); healthcare applications; medical devices
Compliance and Documentation Notes
Consult the Product Regulatory Summary and Safety Data Sheet (SDS) for regulatory status, including supported, restricted or prohibited applications. Contact Genesis Polymers to request application-specific documentation for CertyForm H1201.
Technical Properties
Melt Flow Rate
190 °C/2.16 kg
ISO 1133-1
Melt Flow Rate
190 °C/5.0 kg
ISO 1133-1
Density
ISO 1183-1
Tensile Modulus
ISO 527-1, -2
Tensile Stress at Yield
ISO 527-1, -2
Tensile Strain at Yield
ISO 527-1, -2
Charpy Impact Strength - Notched
23 °C, Type 1, Edgewise, Notch A
ISO 179
Charpy Impact Strength - Notched
-30 °C, Type 1, Edgewise, Notch A
ISO 179
Shore Hardness
Shore D
ISO 868
Vicat Softening Temperature
B50
ISO 306
Typical values taken from the producer’s (Velogy) technical data sheet, available under Documents. They are not specification limits. Genesis Polymers relies on the producer’s data and cannot accept liability for errors in it. Always check the current data sheet and confirm suitability for your application.
Brand
Feature
Low Warpage
High Stiffness
Food Contact
Supplier documents
Version 2, 4 September 2026
Version 2, 10 August 2026
Version 1, 30 July 2026
Version 2.1, 21 August 2026
Version 1.2, revision date 28 August 2026
