LDPE

KeyForm L0800

""

Natural

LDPE

KeyForm L0800

Products

/

KeyForm

/

KeyForm L0800

— LDPE

KeyForm L0800

Produced by

→

KeyForm L0800 is a non-additivated low-density polyethylene.

APPLICATIONS

— AT A GLANCE

KeyForm L0800 at a glance

Polymer family

LDPE

Brand

Producer

Features

Clarified

Food Contact

Processing

Film extrusion

Blown film extrusion

— ABOUT THIS GRADE

KeyForm L0800 is a non-additivated low-density polyethylene. It offers a balance of processability and mechanical properties, and the supplier describes good optical properties in films. Listed uses include bags and pouches, food-packaging film, hygiene film, liners and shrink film.

— TECHNICAL PROPERTIES

Technical properties

Melt Flow Rate

1.9 g/10 min

190 °C/2.16 kg

·

ISO 1133-1

Density

0.924 g/cm³

ISO 1183-1

Tensile Modulus

260 MPa

ISO 527-1, -2

Tensile Stress at Yield

11 MPa

ISO 527-1, -2

Dart Drop Impact Strength, F50

110 g

ASTM D1709

Tensile Strength

25 MPa

machine direction (MD)

·

ISO 527-1, -3

Tensile Strength

21 MPa

transverse direction (TD)

·

ISO 527-1, -3

Tensile Strain at Break

250 %

machine direction (MD)

·

ISO 527-1, -3

Tensile Strain at Break

600 %

transverse direction (TD)

·

ISO 527-1, -3

Coefficient of Friction

> 0.8

ISO 8295

Failure Energy

4 J/mm

Film thickness: 70 µm

·

DIN 53373

Vicat Softening Temperature

94 °C

A/50

·

ISO 306

Peak Melting Point

111 °C

ISO 11357-3

Haze

< 8 %

50 µm

·

ASTM D1003

Gloss

> 50

20°

·

ASTM D2457

Gloss

> 100

60°

·

ASTM D2457

Film properties tested using 50 µm thickness blown film extruded at a melt temperature of 180 °C and a blowup ratio of 2.5:1. The TDS separately states a film thickness of 70 µm for failure energy.

Typical values taken from the producer’s (Velogy) technical data sheet, available under Supplier documents. They are not specification limits. Genesis Polymers relies on the producer’s data and cannot accept liability for errors in it. Always check the current data sheet and confirm suitability for your application.

Processing

Supplier-listed processing methods: blown film; cast film. Determine processing conditions for the intended application and required properties.

Film extrusion

Blown film extrusion

Typical applications

Bags and pouches; food packaging film; hygiene film; liner film; shrink film

Compliance and documentation notes

Consult the Product Regulatory Summary and Safety Data Sheet (SDS) for regulatory status, including supported, restricted or prohibited applications. Contact Genesis Polymers to request application-specific documentation for KeyForm L0800.

— TECHNICAL PROPERTIES

Technical properties

PROPERTY

VALUE

CONDITIONS

METHOD

Melt Flow Rate

1.9 g/10 min

190 °C/2.16 kg

ISO 1133-1

Density

0.924 g/cm³

ISO 1183-1

Tensile Modulus

260 MPa

ISO 527-1, -2

Tensile Stress at Yield

11 MPa

ISO 527-1, -2

Dart Drop Impact Strength, F50

110 g

ASTM D1709

Tensile Strength

25 MPa

machine direction (MD)

ISO 527-1, -3

Tensile Strength

21 MPa

transverse direction (TD)

ISO 527-1, -3

Tensile Strain at Break

250 %

machine direction (MD)

ISO 527-1, -3

Tensile Strain at Break

600 %

transverse direction (TD)

ISO 527-1, -3

Coefficient of Friction

> 0.8

ISO 8295

Failure Energy

4 J/mm

Film thickness: 70 µm

DIN 53373

Vicat Softening Temperature

94 °C

A/50

ISO 306

Peak Melting Point

111 °C

ISO 11357-3

Haze

< 8 %

50 µm

ASTM D1003

Gloss

> 50

20°

ASTM D2457

Gloss

> 100

60°

ASTM D2457

Film properties tested using 50 µm thickness blown film extruded at a melt temperature of 180 °C and a blowup ratio of 2.5:1. The TDS separately states a film thickness of 70 µm for failure energy.

Typical values taken from the producer’s (Velogy) technical data sheet, available under Supplier documents. They are not specification limits. Genesis Polymers relies on the producer’s data and cannot accept liability for errors in it. Always check the current data sheet and confirm suitability for your application.

— APPLICATIONS

Applications for this grade

— BRAND AND PRODUCER

Brand and producer

Brand

Key

Form®

For everyday performance: consistent quality and reliable supply in PP, HDPE and LDPE for packaging, consumer products, industrial containers, fibres and agriculture.

PP

LDPE

HDPE

Key

Form®

For everyday performance: consistent quality and reliable supply in PP, HDPE and LDPE for packaging, consumer products, industrial containers, fibres and agriculture.

PP

LDPE

HDPE

— NEED HELP CHOOSING?

Not sure which grade fits?

Tell us your part, process and the grade you use today, and we’ll help you confirm the right grade.