Go back
PP impact copolymer
AdvyForm E0970
Formerly
Moplen EP445L
Natural
AdvyForm E0970 is a polypropylene impact copolymer with medium melt-flow rate, for compression and injection moulding. It combines stiffness and impact strength with high stress-cracking resistance and low stress whitening.
Description
AdvyForm E0970 is a polypropylene impact copolymer with medium melt-flow rate, for compression and injection moulding. It combines stiffness and impact strength with high stress-cracking resistance and low stress whitening. The grade is nucleated; caps and closures, housewares, toys and leisure products are supplier-listed applications.
Processing Techniques
Supplier-listed processing methods: compression moulding; injection moulding. Determine processing conditions for the intended application and required properties.
Injection molding
Industry and applications
Caps and closures; housewares; sports, leisure and toys
Compliance and Documentation Notes
Consult the Product Regulatory Summary and Safety Data Sheet (SDS) for regulatory status, including supported, restricted or prohibited applications. Contact Genesis Polymers to request application-specific documentation for AdvyForm E0970.
Technical Properties
Melt Flow Rate
230 °C/2.16 kg
ISO 1133-1
Density
23 °C
ISO 1183-1
Tensile Modulus
ISO 527-1, -2
Tensile Stress at Yield
ISO 527-1, -2
Tensile Strain at Break
ISO 527-1, -2
Tensile Strain at Yield
ISO 527-1, -2
Charpy Impact Strength - Notched
23 °C, Type 1, Edgewise, Notch A
ISO 179
Charpy Impact Strength - Notched
0 °C, Type 1, Edgewise, Notch A
ISO 179
Charpy Impact Strength - Notched
-20 °C, Type 1, Edgewise, Notch A
ISO 179
Vicat Softening Temperature
A50
ISO 306
Heat Deflection Temperature B
0.45 MPa, Unannealed
ISO 75B-1, -2
Typical values taken from the producer’s (Velogy) technical data sheet, available under Documents. They are not specification limits. Genesis Polymers relies on the producer’s data and cannot accept liability for errors in it. Always check the current data sheet and confirm suitability for your application.
Brand
Feature
Antiblock/Slip
Antistatic
High ESCR
Low Stress Whitening
Nucleated
Food Contact
Supplier documents
Version 2, 3 September 2026
