Go back
PP impact copolymer
AdvyForm E1801
Formerly
Moplen EP500V
Natural
AdvyForm E1801 is an ultra-high-fluidity polypropylene copolymer for injection moulding. It combines high stiffness with good impact resistance, including at sub-zero temperatures.
Description
AdvyForm E1801 is an ultra-high-fluidity polypropylene copolymer for injection moulding. It combines high stiffness with good impact resistance, including at sub-zero temperatures. The supplier identifies items with long flow paths as a typical use.
Processing Techniques
Supplier-listed processing methods: compounding; injection moulding. Determine processing conditions for the intended application and required properties.
Injection molding
Compounding
Industry and applications
Containers; housewares; sports, leisure and toys; thin-wall (TWIM) food containers
Compliance and Documentation Notes
Consult the Product Regulatory Summary and Safety Data Sheet (SDS) for regulatory status, including supported, restricted or prohibited applications. Contact Genesis Polymers to request application-specific documentation for AdvyForm E1801.
Technical Properties
Melt Flow Rate
230 °C/2.16 kg
ISO 1133-1
Melt Volume Flow Rate
230 °C/2.16 kg
ISO 1133-1
Density
ISO 1183-1
Flexural Modulus
ISO 178
Tensile Modulus
ISO 527-1, -2
Tensile Stress at Yield
ISO 527-1, -2
Tensile Strain at Yield
ISO 527-1, -2
Charpy Impact Strength - Notched
23 °C, Type 1, Edgewise, Notch A
ISO 179
Charpy Impact Strength - Notched
0 °C, Type 1, Edgewise, Notch A
ISO 179
Charpy Impact Strength - Notched
-20 °C, Type 1, Edgewise, Notch A
ISO 179
Vicat Softening Temperature
A/50
ISO 306
Vicat Softening Temperature
B50
ISO 306
Heat Deflection Temperature B
0.45 MPa, Unannealed
ISO 75B-1, -2
Typical values taken from the producer’s (Velogy) technical data sheet, available under Documents. They are not specification limits. Genesis Polymers relies on the producer’s data and cannot accept liability for errors in it. Always check the current data sheet and confirm suitability for your application.
Brand
Feature
High Flow
High Impact
High Stiffness
Food Contact
Supplier documents
Version 2, 3 September 2026
