HDPE

AdvyForm H0780

""

Natural

HDPE

AdvyForm H0780

Products

/

AdvyForm

/

AdvyForm H0780

— HDPE

AdvyForm H0780

Produced by

→

AdvyForm H0780 is a high-density polyethylene for caps and closures. It combines stiffness, toughness and environmental stress-cracking resistance.

APPLICATIONS

— AT A GLANCE

AdvyForm H0780 at a glance

Polymer family

HDPE

Producer

Features

High ESCR

Food Contact

Processing

Injection moulding

— ABOUT THIS GRADE

AdvyForm H0780 is a high-density polyethylene for caps and closures. It combines stiffness, toughness and environmental stress-cracking resistance. Its additive package is intended to balance organoleptic properties and opening torque.

— TECHNICAL PROPERTIES

Technical properties

Melt Flow Rate

1.45 g/10 min

190 °C/2.16 kg

·

ISO 1133-1

Melt Flow Rate

6.4 g/10 min

190 °C/5.0 kg

·

ISO 1133-1

Density

0.954 g/cm³

ISO 1183-1

Tensile Modulus

1100 MPa

ISO 527-1, -2

Tensile Stress at Yield

22 MPa

ISO 527-1, -2

Tensile Strain at Yield

10 %

ISO 527-1, -2

FNCT

12 hr

6.0 MPa, 6.6% Dehyton PL, 50 °C

·

ISO 16770

Charpy Impact Strength - Notched

11 kJ/m²

23 °C

·

ISO 179

Charpy Impact Strength - Notched

4.5 kJ/m²

-30 °C

·

ISO 179

Shore Hardness

55

Shore D

·

ISO 868

Ball Indentation Hardness

54 MPa

ISO 2039-1

Vicat Softening Temperature

70 °C

B50

·

ISO 306

Typical values taken from the producer’s (Velogy) technical data sheet, available under Supplier documents. They are not specification limits. Genesis Polymers relies on the producer’s data and cannot accept liability for errors in it. Always check the current data sheet and confirm suitability for your application.

Processing

Supplier-listed processing methods: compression moulding; injection moulding. Determine processing conditions for the intended application and required properties.

Injection moulding

Typical applications

Caps and closures; collapsible tubes

Compliance and documentation notes

Consult the Product Regulatory Summary and Safety Data Sheet (SDS) for regulatory status, including supported, restricted or prohibited applications. Contact Genesis Polymers to request application-specific documentation for AdvyForm H0780.

— TECHNICAL PROPERTIES

Technical properties

PROPERTY

VALUE

CONDITIONS

METHOD

Melt Flow Rate

1.45 g/10 min

190 °C/2.16 kg

ISO 1133-1

Melt Flow Rate

6.4 g/10 min

190 °C/5.0 kg

ISO 1133-1

Density

0.954 g/cm³

ISO 1183-1

Tensile Modulus

1100 MPa

ISO 527-1, -2

Tensile Stress at Yield

22 MPa

ISO 527-1, -2

Tensile Strain at Yield

10 %

ISO 527-1, -2

FNCT

12 hr

6.0 MPa, 6.6% Dehyton PL, 50 °C

ISO 16770

Charpy Impact Strength - Notched

11 kJ/m²

23 °C

ISO 179

Charpy Impact Strength - Notched

4.5 kJ/m²

-30 °C

ISO 179

Shore Hardness

55

Shore D

ISO 868

Ball Indentation Hardness

54 MPa

ISO 2039-1

Vicat Softening Temperature

70 °C

B50

ISO 306

Typical values taken from the producer’s (Velogy) technical data sheet, available under Supplier documents. They are not specification limits. Genesis Polymers relies on the producer’s data and cannot accept liability for errors in it. Always check the current data sheet and confirm suitability for your application.

— APPLICATIONS

Applications for this grade

— BRAND AND PRODUCER

Brand and producer

Brand

Advy

Form®

For demanding applications where material performance makes the difference: PP, HDPE and LDPE for packaging, automotive, compounding, pipe and film.

PP

LDPE

HDPE

Advy

Form®

For demanding applications where material performance makes the difference: PP, HDPE and LDPE for packaging, automotive, compounding, pipe and film.

PP

LDPE

HDPE

— NEED HELP CHOOSING?

Not sure which grade fits?

Tell us your part, process and the grade you use today, and we’ll help you confirm the right grade.