Go back
HDPE
AdvyForm H0880
Formerly
Hostalen ACP 5331H UV B PLUS
Natural
AdvyForm H0880 is a high-density polyethylene (HDPE) for injection and compression moulding of caps, closures and tube shoulders. The supplier describes a balance of stiffness, toughness and environmental stress crack resistance (ESCR).
Description
AdvyForm H0880 is an HDPE resin that the supplier describes as easy to process on injection moulding and compression moulding equipment. Its balance of stiffness, toughness and environmental stress crack resistance (ESCR) is directed at closures for sparkling water and carbonated soft drinks (CSD), other food and non-food caps and closures, and tube shoulders. It is formulated with an additive package intended to optimise the combination of organoleptic properties and opening torque. Typical values include a melt flow rate of 2.1 g/10 min (190 °C/2.16 kg), a density of 0.953 g/cm³ and an FNCT of 4 h (ISO 16770; 6.0 MPa, 6.6% Dehyton PL, 50 °C).
Processing Techniques
Supplier-listed processing methods: compression moulding; injection moulding. The TDS gives recommended melt temperatures of 190 °C to 230 °C. Determine processing conditions for the intended application and required properties.
Injection molding
Industry and applications
Caps and closures; collapsible tubes
Compliance and Documentation Notes
Consult the Product Regulatory Summary and Safety Data Sheet (SDS) for regulatory status, including supported, restricted or prohibited applications. Contact Genesis Polymers to request application-specific documentation for AdvyForm H0880.
Technical Properties
Melt Flow Rate
190 °C/2.16 kg
ISO 1133-1
Melt Flow Rate
190 °C/5.0 kg
ISO 1133-1
Density
ISO 1183-1
Tensile Modulus
ISO 527-1, -2
Tensile Stress at Yield
ISO 527-1, -2
Tensile Strain at Yield
ISO 527-1, -2
FNCT
6.0 MPa, 6.6% Dehyton PL, 50 °C
ISO 16770
Charpy Impact Strength - Notched
23 °C
ISO 179
Charpy Impact Strength - Notched
-30 °C
ISO 179
Shore Hardness (Shore D)
ISO 868
Vicat Softening Temperature
B50
ISO 306
Typical values taken from the producer’s (Velogy) technical data sheet, available under Documents. They are not specification limits. Genesis Polymers relies on the producer’s data and cannot accept liability for errors in it. Always check the current data sheet and confirm suitability for your application.
Brand
Feature
High ESCR
Food Contact
Supplier documents
Version 2, 3 September 2026
Version 2, 10 August 2026
Version 1, 30 July 2026
Version 2, 18 August 2026
Version 1.2, revision date 1 June 2026
