Go back
HDPE
KeyForm H0501
Formerly
Hostalen ACP 7740 F3
Natural
KeyForm H0501 is a high-density polyethylene with medium molar mass and a narrow molar-mass distribution, for tapes. It offers very good bubble stability and processability.
Description
KeyForm H0501 is a high-density polyethylene with medium molar mass and a narrow molar-mass distribution, for tapes. It offers very good bubble stability and processability. The supplier describes good tensile strength and elongation at break in tapes, with a low tendency to fibrillate.
Processing Techniques
The TDS lists blown film as the processing method; its product description refers to conversion on tape-stretching lines. Determine processing conditions for the intended application and required properties.
Film extrusion
Blown film extrusion
Industry and applications
Geotextile and agriculture; nets; raffia, tapes and strapping
Compliance and Documentation Notes
Consult the Product Regulatory Summary and Safety Data Sheet (SDS) for regulatory status, including supported, restricted or prohibited applications. Contact Genesis Polymers to request application-specific documentation for KeyForm H0501.
Technical Properties
Melt Flow Rate
190 °C/5.0 kg
ISO 1133-1
Melt Flow Rate
190 °C/21.6 kg
ISO 1133-1
Density
ISO 1183-1
Tensile Modulus
ISO 527-1, -2
Tensile Stress at Yield
ISO 527-1, -2
Vicat Softening Temperature
B50
ISO 306
Peak Melting Point
ISO 11357-3
Typical values taken from the producer’s (Velogy) technical data sheet, available under Documents. They are not specification limits. Genesis Polymers relies on the producer’s data and cannot accept liability for errors in it. Always check the current data sheet and confirm suitability for your application.
Brand
Feature
Antioxidant
High Tensile Strength
Narrow Molecular Weight Distribution
Food Contact
Supplier documents
Version 1.1, June 2026
