HDPE

KeyForm H1100

""

Natural

HDPE

KeyForm H1100

Products

/

KeyForm

/

KeyForm H1100

— HDPE

KeyForm H1100

Produced by

→

KeyForm H1100 is a high-density polyethylene for general injection moulding. It offers high environmental stress-cracking resistance (ESCR), good impact resistance, good flow and low warpage.

APPLICATIONS

— AT A GLANCE

KeyForm H1100 at a glance

Polymer family

HDPE

Brand

Producer

Features

Antioxidant

High Impact

Low Warpage

High ESCR

High Stiffness

Food Contact

Processing

Injection moulding

— ABOUT THIS GRADE

KeyForm H1100 is a high-density polyethylene for general injection moulding. It offers high environmental stress-cracking resistance (ESCR), good impact resistance, good flow and low warpage. Typical uses include pallets and dust bins, and the TDS also lists caps and closures, crates, housewares, panels and profiles, and toys. The grade is supplied as pellets and contains antioxidants.

— TECHNICAL PROPERTIES

Technical properties

Melt Flow Rate

4 g/10 min

190 °C/2.16 kg

·

ISO 1133-1

Melt Flow Rate

11 g/10 min

190 °C/5.0 kg

·

ISO 1133-1

Density

0.955 g/cm³

ISO 1183-1

Tensile Modulus

1200 MPa

ISO 527-1, -2

Tensile Stress at Yield

27 MPa

ISO 527-1, -2

Tensile Strain at Yield

8 %

ISO 527-1, -2

FNCT

4.5 hr

6.0 MPa, 2% Arkopal N100, 50 °C

·

ISO 16770

Charpy Impact Strength - Notched

4 kJ/m²

23 °C, Type 1, Edgewise, Notch A

·

ISO 179

Charpy Impact Strength - Notched

4.5 kJ/m²

-30 °C, Type 1, Edgewise, Notch A

·

ISO 179

Shore Hardness

60

Shore D

·

ISO 868

Ball Indentation Hardness

52 MPa

H 132/30

·

ISO 2039-1

Vicat Softening Temperature

73 °C

B50

·

ISO 306

Typical values taken from the producer’s (Velogy) technical data sheet, available under Supplier documents. They are not specification limits. Genesis Polymers relies on the producer’s data and cannot accept liability for errors in it. Always check the current data sheet and confirm suitability for your application.

Processing

Supplier-listed processing method: injection moulding. Determine processing conditions for the intended application and required properties.

Injection moulding

Typical applications

Caps and closures; crates; housewares; industrial; panels and profiles; sports, leisure and toys

Compliance and documentation notes

Consult the Product Regulatory Summary and Safety Data Sheet (SDS) for regulatory status, including supported, restricted or prohibited applications. Contact Genesis Polymers to request application-specific documentation for KeyForm H1100.

— TECHNICAL PROPERTIES

Technical properties

PROPERTY

VALUE

CONDITIONS

METHOD

Melt Flow Rate

4 g/10 min

190 °C/2.16 kg

ISO 1133-1

Melt Flow Rate

11 g/10 min

190 °C/5.0 kg

ISO 1133-1

Density

0.955 g/cm³

ISO 1183-1

Tensile Modulus

1200 MPa

ISO 527-1, -2

Tensile Stress at Yield

27 MPa

ISO 527-1, -2

Tensile Strain at Yield

8 %

ISO 527-1, -2

FNCT

4.5 hr

6.0 MPa, 2% Arkopal N100, 50 °C

ISO 16770

Charpy Impact Strength - Notched

4 kJ/m²

23 °C, Type 1, Edgewise, Notch A

ISO 179

Charpy Impact Strength - Notched

4.5 kJ/m²

-30 °C, Type 1, Edgewise, Notch A

ISO 179

Shore Hardness

60

Shore D

ISO 868

Ball Indentation Hardness

52 MPa

H 132/30

ISO 2039-1

Vicat Softening Temperature

73 °C

B50

ISO 306

Typical values taken from the producer’s (Velogy) technical data sheet, available under Supplier documents. They are not specification limits. Genesis Polymers relies on the producer’s data and cannot accept liability for errors in it. Always check the current data sheet and confirm suitability for your application.

— APPLICATIONS

Applications for this grade

— BRAND AND PRODUCER

Brand and producer

Brand

Key

Form®

For everyday performance: consistent quality and reliable supply in PP, HDPE and LDPE for packaging, consumer products, industrial containers, fibres and agriculture.

PP

LDPE

HDPE

Key

Form®

For everyday performance: consistent quality and reliable supply in PP, HDPE and LDPE for packaging, consumer products, industrial containers, fibres and agriculture.

PP

LDPE

HDPE

— NEED HELP CHOOSING?

Not sure which grade fits?

Tell us your part, process and the grade you use today, and we’ll help you confirm the right grade.