Go back
HDPE
KeyForm H1280
Formerly
Hostalen GC 7260 LS
Natural
KeyForm H1280 is a UV-stabilised high-density polyethylene for injection moulding. It has good flow and high rigidity.
Description
KeyForm H1280 is a UV-stabilised high-density polyethylene for injection moulding. It has good flow and high rigidity. Typical uses include toys, dust-bin lids, crates, housewares and packaging. The TDS also lists antioxidant, low-warpage and good-processability attributes.
Processing Techniques
Supplier-listed processing method: injection moulding. Determine processing conditions for the intended application and required properties.
Injection molding
Industry and applications
Crates; housewares; industrial; panels and profiles; sports, leisure and toys
Compliance and Documentation Notes
Consult the Product Regulatory Summary and Safety Data Sheet (SDS) for regulatory status, including supported, restricted or prohibited applications. Contact Genesis Polymers to request application-specific documentation for KeyForm H1280.
Technical Properties
Melt Flow Rate
190 °C/2.16 kg
ISO 1133-1
Melt Flow Rate
190 °C/5.0 kg
ISO 1133-1
Density
ISO 1183-1
Tensile Modulus
ISO 527-1, -2
Tensile Stress at Yield
ISO 527-1, -2
Tensile Strain at Yield
ISO 527-1, -2
FNCT
6.0 MPa, 2% Arkopal N100, 50 °C
ISO 16770
Charpy Impact Strength - Notched
23 °C, Type 1, Edgewise, Notch A
ISO 179
Charpy Impact Strength - Notched
-30 °C, Type 1, Edgewise, Notch A
ISO 179
Shore Hardness
Shore D
ISO 868
Ball Indentation Hardness
H 132/30
ISO 2039-1
Vicat Softening Temperature
B50
ISO 306
Typical values taken from the producer’s (Velogy) technical data sheet, available under Documents. They are not specification limits. Genesis Polymers relies on the producer’s data and cannot accept liability for errors in it. Always check the current data sheet and confirm suitability for your application.
Brand
Feature
Antioxidant
Low Warpage
UV Stabilized
High Stiffness
Food Contact
Supplier documents
Version 1.2, June 2026
Version 2, 10 August 2026
Version 1, 30 July 2026
Version 2, 26 August 2026
Version 1.1, revision date 1 June 2026
