PP homopolymer

KeyForm P0711

""

Natural

PP homopolymer

KeyForm P0711

Products

/

KeyForm

/

KeyForm P0711

— PP homopolymer

KeyForm P0711

Produced by

→

KeyForm P0711 is a polypropylene homopolymer for extrusion of high-tenacity staple fibres. It contains an anti-gas-fading stabilisation package.

APPLICATIONS

— AT A GLANCE

KeyForm P0711 at a glance

Polymer family

PP homopolymer

Brand

Producer

Features

Food Contact

Processing

Fibre and nonwoven

— ABOUT THIS GRADE

KeyForm P0711 is a polypropylene homopolymer for extrusion of high-tenacity staple fibres. It contains an anti-gas-fading stabilisation package. Nonwovens are the supplier's typical application. The TDS gives a typical melt flow rate of 3.4 g/10 min (230 °C/2.16 kg).

— TECHNICAL PROPERTIES

Technical properties

Melt Flow Rate

3.4 g/10 min

230 °C/2.16 kg

·

ISO 1133-1

Density

0.9 g/cm³

ISO 1183-1

Flexural Modulus

1400 N/mm²

ISO 178

Tensile Stress at Break

23 N/mm²

23 °C, 50 mm/min

·

ISO 527-1, -2

Tensile Stress at Yield

34 N/mm²

23 °C, 50 mm/min

·

ISO 527-1, -2

Tensile Strain at Break

700 %

23 °C, 50 mm/min

·

ISO 527-1, -2

Tensile Strain at Yield

11 %

23 °C, 50 mm/min

·

ISO 527-1, -2

Vicat Softening Temperature

155 °C

A50

·

ISO 306

Deflection Temperature Under Load

85 °C

0.45 MPa, Unannealed

·

ISO 75B-1, -2

Typical values taken from the producer’s (Velogy) technical data sheet, available under Supplier documents. They are not specification limits. Genesis Polymers relies on the producer’s data and cannot accept liability for errors in it. Always check the current data sheet and confirm suitability for your application.

Processing

Supplier-listed processing methods: continuous filament spinning; fibres; staple fibre. Determine processing conditions for the intended application and required properties.

Fibre and nonwoven

Typical applications

Filament yarn; furniture and buildings; geotextile and agriculture; nonwovens

Compliance and documentation notes

Consult the Product Regulatory Summary and Safety Data Sheet (SDS) for regulatory status, including supported, restricted or prohibited applications. Contact Genesis Polymers to request application-specific documentation for KeyForm P0711.

— TECHNICAL PROPERTIES

Technical properties

PROPERTY

VALUE

CONDITIONS

METHOD

Melt Flow Rate

3.4 g/10 min

230 °C/2.16 kg

ISO 1133-1

Density

0.9 g/cm³

ISO 1183-1

Flexural Modulus

1400 N/mm²

ISO 178

Tensile Stress at Break

23 N/mm²

23 °C, 50 mm/min

ISO 527-1, -2

Tensile Stress at Yield

34 N/mm²

23 °C, 50 mm/min

ISO 527-1, -2

Tensile Strain at Break

700 %

23 °C, 50 mm/min

ISO 527-1, -2

Tensile Strain at Yield

11 %

23 °C, 50 mm/min

ISO 527-1, -2

Vicat Softening Temperature

155 °C

A50

ISO 306

Deflection Temperature Under Load

85 °C

0.45 MPa, Unannealed

ISO 75B-1, -2

Typical values taken from the producer’s (Velogy) technical data sheet, available under Supplier documents. They are not specification limits. Genesis Polymers relies on the producer’s data and cannot accept liability for errors in it. Always check the current data sheet and confirm suitability for your application.

— APPLICATIONS

Applications for this grade

— BRAND AND PRODUCER

Brand and producer

Brand

Key

Form®

For everyday performance: consistent quality and reliable supply in PP, HDPE and LDPE for packaging, consumer products, industrial containers, fibres and agriculture.

PP

LDPE

HDPE

Key

Form®

For everyday performance: consistent quality and reliable supply in PP, HDPE and LDPE for packaging, consumer products, industrial containers, fibres and agriculture.

PP

LDPE

HDPE

— NEED HELP CHOOSING?

Not sure which grade fits?

Tell us your part, process and the grade you use today, and we’ll help you confirm the right grade.