Go back
PP impact copolymer
AdvyForm E0400
Formerly
Moplen EP310D HP
Natural
AdvyForm E0400 is a low-flow polypropylene heterophasic copolymer for film extrusion where high mechanical properties matter most. It contains no antiblocking or slip additives.
Description
AdvyForm E0400 is a low-flow polypropylene heterophasic copolymer for extrusion applications where high mechanical properties matter most. It contains no antiblocking or slip additives. The supplier reports that it is normally extruded as single-layer film for lamination onto other substrates, giving structures that can be processed under high retorting conditions. Reported uses also include adhesive-tape film, freezer film, pipes, fittings, extrusion blow-moulded containers and heavy-duty bags. The supplier describes high impact, good puncture and tear resistance, and high seal strength and seal integrity. Typical values include a melt flow rate of 0.95 g/10 min (230 °C/2.16 kg, ISO 1133-1) and notched Charpy impact strengths of 50 kJ/m² at 23 °C and 5 kJ/m² at -20 °C (ISO 179, Type 1, edgewise, notch A).
Processing Techniques
Supplier-listed processing methods: blown film; cast film; extrusion blow moulding; pipe. Determine processing conditions for the intended application and required properties. Contact Genesis Polymers for technical support where higher processing temperatures are required.
Blown film extrusion
Film extrusion
Extrusion blow molding
Extrusion
Industry and applications
Containers; food packaging film; heavy-duty packaging; lamination film; surface protection film
Compliance and Documentation Notes
Consult the Product Regulatory Summary and Safety Data Sheet (SDS) for regulatory status, including supported, restricted or prohibited applications. Contact Genesis Polymers to request application-specific documentation for AdvyForm E0400.
Technical Properties
Density
ISO 1183-1
Melt Flow Rate
230 °C/2.16 kg
ISO 1133-1
Charpy Impact Strength - Notched
-20 °C, Type 1, Edgewise, Notch A
ISO 179
Charpy Impact Strength - Notched
23 °C, Type 1, Edgewise, Notch A
ISO 179
Flexural Modulus
ISO 178
Tensile Strain at Yield
ISO 527-1, -2
Tensile Strain at Break
ISO 527-1, -2
Tensile Stress at Yield
ISO 527-1, -2
Tensile Stress at Break
ISO 527-1, -2
Heat Deflection Temperature B
0.45 MPa, unannealed
ISO 75-1, -2
Vicat Softening Temperature
A/50
ISO 306
Typical values taken from the producer’s (Velogy) technical data sheet, available under Documents. They are not specification limits. Genesis Polymers relies on the producer’s data and cannot accept liability for errors in it. Always check the current data sheet and confirm suitability for your application.
Brand
Feature
Food Contact
Supplier documents
Version 2, 3 September 2026
Version 2, 10 August 2026
Version 1, 30 July 2026
Version 2, 5 August 2026
Version 1.2, revision date 1 June 2026
