Go back
PP impact copolymer
AdvyForm E1232
Formerly
Moplen EP240P
Natural
AdvyForm E1232 is a nucleated, medium-flow polypropylene impact copolymer for injection moulding. It is characterised by low-temperature impact resistance for crates, housewares and opaque containers.
Description
AdvyForm E1232 is a nucleated heterophasic polypropylene copolymer with medium flow for injection moulding. It is characterised by low-temperature impact resistance and is typically used for crates, housewares and opaque containers. Typical values include a melt flow rate of 15 g/10 min (230 °C/2.16 kg) and a tensile modulus of 950 MPa. Notched Charpy impact strength is 20 kJ/m² at 23 °C, 9 kJ/m² at 0 °C and 5 kJ/m² at -20 °C (ISO 179), with a ductile/brittle transition temperature of -50 °C (ISO 6603-2).
Processing Techniques
Supplier-listed processing method: injection moulding. Determine processing conditions for the intended application and required properties. Contact Genesis Polymers for technical support where higher processing temperatures are required.
Injection molding
Industry and applications
Crates; housewares; opaque containers; sports, leisure and toys
Compliance and Documentation Notes
Consult the Product Regulatory Summary and Safety Data Sheet (SDS) for regulatory status, including supported, restricted or prohibited applications. Contact Genesis Polymers to request application-specific documentation for AdvyForm E1232.
Technical Properties
Density
ISO 1183-1
Melt Flow Rate
230 °C/2.16 kg
ISO 1133-1
Ductile/Brittle Transition Temperature
ISO 6603-2
Charpy Impact Strength - Notched
-20 °C, Type 1, Edgewise, Notch A
ISO 179
Charpy Impact Strength - Notched
0 °C, Type 1, Edgewise, Notch A
ISO 179
Charpy Impact Strength - Notched
23 °C, Type 1, Edgewise, Notch A
ISO 179
Tensile Strain at Yield
ISO 527-1, -2
Tensile Strain at Break
ISO 527-1, -2
Tensile Stress at Yield
ISO 527-1, -2
Tensile Modulus
ISO 527-1, -2
Vicat Softening Temperature
A/50
ISO 306
Typical values taken from the producer’s (Velogy) technical data sheet, available under Documents. They are not specification limits. Genesis Polymers relies on the producer’s data and cannot accept liability for errors in it. Always check the current data sheet and confirm suitability for your application.
Brand
Feature
Nucleated
High Impact
Food Contact
Supplier documents
Version 2, 3 September 2026
Version 2, 10 August 2026
Version 1, 6 August 2026
Version 1, 6 August 2026
Version 1.0, revision date 12 August 2026
