Go back
PP impact copolymer
AdvyForm E1530
Formerly
Moplen EP240T
Natural
AdvyForm E1530 is a nucleated, high-flow polypropylene impact copolymer for injection moulding. It combines high flow with a medium stiffness-impact balance for housewares and opaque containers.
Description
AdvyForm E1530 is a nucleated heterophasic polypropylene copolymer for injection moulding. It combines high flow with a medium stiffness-impact balance and is typically used in housewares and opaque containers. Typical values include a melt flow rate of 48 g/10 min (230 °C/2.16 kg) and a tensile modulus of 950 MPa. Notched Charpy impact strength is 10 kJ/m² at 23 °C, 7 kJ/m² at 0 °C and 4 kJ/m² at -20 °C (ISO 179).
Processing Techniques
Supplier-listed processing method: injection moulding. Determine processing conditions for the intended application and required properties. Contact Genesis Polymers for technical support where higher processing temperatures are required.
Injection molding
Industry and applications
Housewares; opaque containers
Compliance and Documentation Notes
Consult the Product Regulatory Summary and Safety Data Sheet (SDS) for regulatory status, including supported, restricted or prohibited applications. Contact Genesis Polymers to request application-specific documentation for AdvyForm E1530.
Technical Properties
Melt Flow Rate
230 °C/2.16 kg
ISO 1133-1
Density
ISO 1183-1
Tensile Modulus
ISO 527-1, -2
Tensile Stress at Yield
ISO 527-1, -2
Tensile Strain at Break
ISO 527-1, -2
Tensile Strain at Yield
ISO 527-1, -2
Charpy Impact Strength - Notched
23 °C, Edgewise, Notch A
ISO 179
Charpy Impact Strength - Notched
0 °C, Edgewise, Notch A
ISO 179
Charpy Impact Strength - Notched
-20 °C, Edgewise, Notch A
ISO 179
Vicat Softening Temperature
A50
ISO 306
Typical values taken from the producer’s (Velogy) technical data sheet, available under Documents. They are not specification limits. Genesis Polymers relies on the producer’s data and cannot accept liability for errors in it. Always check the current data sheet and confirm suitability for your application.
Brand
Feature
High Flow
Nucleated
High Stiffness
High Impact
Food Contact
Supplier documents
Version 1.1, 17 August 2026
Version 2, 10 August 2026
Version 1, 30 July 2026
Version 1, 6 August 2026
Version 1.0, revision date 12 August 2026
