Go back
PP random copolymer
AdvyForm R1052
Formerly
Moplen RP315M
Natural
AdvyForm R1052 is a slightly modified polypropylene random copolymer for cast film. It contains slip and antiblocking additives.
Description
AdvyForm R1052 is a slightly modified polypropylene random copolymer used for cast film. It contains slip and antiblocking additives, listed in the TDS as 2000 ppm erucamide slip and 1600 ppm antiblock. The supplier describes very good processability, and films with good clarity, high gloss and high heat weldability. Typical values include a melt flow rate of 8.5 g/10 min (230 °C/2.16 kg) and a flexural modulus of 1100 N/mm² (ISO 178).
Processing Techniques
Supplier-listed processing method: cast film. Specific resin and processing recommendations need the end use, required properties and fabrication equipment to be known.
Film extrusion
Industry and applications
Food packaging film; stationery film; textile packaging film
Compliance and Documentation Notes
Consult the Product Regulatory Summary and Safety Data Sheet (SDS) for regulatory status, including supported, restricted or prohibited applications. Contact Genesis Polymers to request application-specific documentation for AdvyForm R1052.
Technical Properties
Melt Flow Rate
230 °C/2.16 kg
ISO 1133-1
Density
ISO 1183-1
Flexural Modulus
ISO 178
Tensile Stress at Break
23 °C, 50 mm/min
ISO 527-1, -2
Tensile Stress at Yield
23 °C, 50 mm/min
ISO 527-1, -2
Tensile Strain at Break
23 °C, 50 mm/min
ISO 527-1, -2
Tensile Strain at Yield
23 °C, 50 mm/min
ISO 527-1, -2
Charpy Impact Strength - Notched
23 °C, Type 1, Edgewise, Notch A
ISO 179-1/1eA
Charpy Impact Strength - Notched
0 °C, Type 1, Edgewise, Notch A
ISO 179-1/1eA
Vicat Softening Temperature
A50
ISO 306
Deflection Temperature Under Load
0.46 N/mm²
ISO 75B-1, -2
Slip, Erucamide
Velogy Method
Antiblock
Velogy Method
Slip and antiblock contents are measured by a Velogy method.
Typical values taken from the producer’s (Velogy) technical data sheet, available under Documents. They are not specification limits. Genesis Polymers relies on the producer’s data and cannot accept liability for errors in it. Always check the current data sheet and confirm suitability for your application.
Brand
Feature
Antiblock/Slip
Clarified
Food Contact
Supplier documents
Version 2, 4 September 2026
Version 2, 10 August 2026
Version 1, 30 July 2026
Version 2, 31 August 2026
Version 1.0, revision date 18 June 2026
