Go back
PP homopolymer
KeyForm P0710
Formerly
Moplen HP456J
Natural
KeyForm P0710 is a polypropylene homopolymer for extrusion and thermoforming. Its additive package is designed for low water carry-over.
Description
KeyForm P0710 is a polypropylene homopolymer for extrusion and thermoforming. Its additive package is designed for low water carry-over. Typical applications include monofilaments, ropes and tapes. The TDS gives a typical melt flow rate of 3.4 g/10 min (230 °C/2.16 kg).
Processing Techniques
Supplier-listed processing methods: compounding; flat-die extrusion; tapes and raffia; thermoforming. Determine processing conditions for the intended application and required properties.
Sheet extrusion/thermoforming
Compounding
Film extrusion
Industry and applications
General sheet extrusion; intermediate bulk containers; raffia, tapes and strapping
Compliance and Documentation Notes
Consult the Product Regulatory Summary and Safety Data Sheet (SDS) for regulatory status, including supported, restricted or prohibited applications. Contact Genesis Polymers to request application-specific documentation for KeyForm P0710.
Technical Properties
Melt Flow Rate
230 °C/2.16 kg
ISO 1133-1
Density
ISO 1183-1
Flexural Modulus
ISO 178
Tensile Modulus
ISO 527-1, -2
Tensile Stress at Break
23 °C, 50 mm/min
ISO 527-1, -2
Tensile Stress at Yield
23 °C, 50 mm/min
ISO 527-1, -2
Tensile Strain at Break
23 °C, 50 mm/min
ISO 527-1, -2
Tensile Strain at Yield
23 °C, 50 mm/min
ISO 527-1, -2
Vicat Softening Temperature
A50
ISO 306
Deflection Temperature Under Load
0.45 MPa, Unannealed
ISO 75B-1, -2
Typical values taken from the producer’s (Velogy) technical data sheet, available under Documents. They are not specification limits. Genesis Polymers relies on the producer’s data and cannot accept liability for errors in it. Always check the current data sheet and confirm suitability for your application.
Brand
Feature
Food Contact
Supplier documents
Version 1.1, June 2026
